Discuss Ct1 miracle seal any good. in the USA area at PlumbersForums.net
Has anyone used this? Is it good or has it caused issues with clogging parts of the system up.
The proposed job is a combi boiler with microbore piping feed through 2 manifold. This could be an problem I guess.Last resort mate and never on a combi type system it is good stuff we had a trade day demonstration, but for me personally I don't like using anything that could possibly clog up any water ways so as I said only use it as a last resort and only on a open type system . Kop
Block up the manifolds?Yes mate I wouldn't do it will block up .
Block up the manifolds?
They said put it in at a radiator furtherest away from the boiler so it will be diluted by the time it gets back to the boiler. Problem being then is the radiators are fed up 10mm pipe back to a manifold.And more likely the plate hex waterways, and depending on combi,main hex waterways
Block the pipework and restrict the manifolds at a guess not worth the risk .Block up the manifolds?
Hex on a logic so I don't think will even seal it and then could have a chance of clogging up the rest of system which is micro bore and manifolds.Hex on a OTE="Stu-B, post: 1093784, member: 77893"]
Could do more harm than good, what’s the leak?
Hex on a logic so I don't think will even seal it and then could have a chance of clogging up the rest of system which is micro bore and manifolds.
Hex on a logic so I don't think will even seal it and then could have a chance of clogging up the rest of system which is micro bore and manifolds.
Reply to Ct1 miracle seal any good. in the USA area at PlumbersForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.