Search the forum,

Discuss Connect Viessmann boiler to honeywell smartfit in the Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Messages
11
Hello guys
Just installed a Viessmann Vitodens 100w and am struggling with the wiring (honeywell smartfit controller). Viessmann say you can just connect the mains power to the boiler, which I've done, and it works. However, there is no pump overrun this way. As soon as demand goes off, the boiler goes off. On the Smartfit pcb, there is a Sl and Pl (switched live and pump live), which I presumably have to connect to the boiler. And this is where I'm stuck. Any suggestions would be appreciated. Many thanks!
 
Need to wire the pump back to the boiler for pump overrun or wire in an overrun timer for the pump
 

Reply to Connect Viessmann boiler to honeywell smartfit in the Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock