Search the forum,

Discuss combi to system conversion in the Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Messages
19
WB 12/14 Heatslave can't cope with two showers so fitted an unvented HWC on S plan, but need to shut off hot water section of combi.
Boiler engineer has visited and was going to do the work, but he does not respond now, not upset him that I am aware of.
Can anyone advise on the process, is the diverter valve removed or replaced?
Thanks
 
you cant not have the hot water on the boiler eg as a combi should be
 
As above use the hotwater side of the combi for a hot tap near the boiler itself , then use the cylinder for the other outlets . Kop
 

Reply to combi to system conversion in the Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock