Search the forum,

Colour match for chip repair

Discuss Colour match for chip repair in the USA area at PlumbersForums.net

J

Jeepy

Messages
8
Hi,
I have a bathstore liberty shower bath with a couple of scratches. I'm trying to find out the ICI colour, but bathstore customer service just isn't.
It would appear most baths are iW28 European white, but the main brands like cramer sell artic white repair kits.

Would anyone know if bathstore baths are Iw28?
thanks
 
How deep are the scratches? Polish them out. I use a boots nail polishes for small scratches. It has 4 grades of abrasive to polish to a sheen.
 
SimonG said:
How deep are the scratches? Polish them out. I use a boots nail polishes for small scratches. It has 4 grades of abrasive to polish to a sheen.
Click to expand...
to deep for a buff unfortunately. Anglo adhesives have a repair kit for any colour, but the kits are pricey, so wanted to be sure on the colour match. thanks
 

Reply to Colour match for chip repair in the USA area at PlumbersForums.net

Similar plumbing topics

Stigster
Does anyone know the name of this model of Roca toilet?
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
111
Stigster
Stigster
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
0
Views
108
ChrisGid
C
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
249
Chuck
C
dreikher
Hole in copper pipe, solder under floor, T coupling & protection
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
105
dreikher
dreikher
sammie81116
Sewer pipe problems not sure about it
Hi all Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my toilet a good few times nothing is going to the sewer so don't know is there a blockage or what way it works many thanks and advice would be grateful
Replies
3
Views
381
Chuck
C
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock