Search the forum,

chrome exposed bath waste fitting

Discuss chrome exposed bath waste fitting in the USA area at PlumbersForums.net

F

fedele

Messages
13
Hello All, I need to fit an external traditional chrome exposed waste to a smaller than standard roll top bath. If I buy any standard one of these, will I be able to cut to size? images attached
 

Attachments

  • BUNBeBa_1218875434_2_LargeProductImage.jpg
    BUNBeBa_1218875434_2_LargeProductImage.jpg
    42.5 KB · Views: 10
  • BWASTE2_lrg1.jpg
    BWASTE2_lrg1.jpg
    44.1 KB · Views: 11
Victorian plumbing supplied this bath and waste kit . Kop
 

Attachments

  • Screenshot_20200729-204007.png
    Screenshot_20200729-204007.png
    287.4 KB · Views: 6
  • Screenshot_20200729-203950.png
    Screenshot_20200729-203950.png
    253.2 KB · Views: 5

Reply to chrome exposed bath waste fitting in the USA area at PlumbersForums.net

Similar plumbing topics

B
What is correct toilet supply line
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
167
ShaunCorbs
ShaunCorbs
D
Covering shallow sewer pipe under concrete Patio
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
5
Views
127
DIwhYdidIstartThis
D
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
2
Views
147
johndave
johndave
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
0
Views
108
ChrisGid
C
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
250
Chuck
C
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock