Search the forum,

Cant identify valve cartridge

Discuss Cant identify valve cartridge in the USA area at PlumbersForums.net

R

RWolfe

Messages
1
Hello all. I'm new to the forum here. Been doing plumbing for a while. I'm helping a friend who's shower was leaking hot water to spout. I puled the cartridges out and noticed someone had serviced the seals and washers before. They had Jerry rigged them with off washers and so on. Come to find out I can find these anywhere. I don't even know what brand it is. The house was built in 1967. The home owner has lived in the house for at least 30+. Any info would be greatly appreciated. Is it possible the replacement looks different. I know this is a long shot, Don't fire me if this is outrageously silly. Attached are the pics I took of one hot stem cartridge and the diverter. Also I didn't measure the valve but I'm sure its close to 6 to 7 inches long. Thanks for your time and have a great day.
 

Attachments

  • H&Div.jpg
    H&Div.jpg
    260.6 KB · Views: 9
  • diverter.jpg
    diverter.jpg
    187.5 KB · Views: 10
  • hotside.jpg
    hotside.jpg
    171.7 KB · Views: 10

Reply to Cant identify valve cartridge in the USA area at PlumbersForums.net

Similar plumbing topics

johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
228
exedon2
exedon2
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock