Currently reading:
Cant adjust Danfoss pressure am I using correct ports?

Discuss Cant adjust Danfoss pressure am I using correct ports? in the Oil and Solid Fuel Forum area at Plumbers Forums

Messages
183
I have a SIP space heater and fitted a new matching spec oil nozzle as part of a service on it.

I wanted to check the pump pressure with the new nozzle and its difficult to be sure what port to connect to.

And that these pumps are definitely adjustable! I turned an Allen screw which is not tight so I presume it's the pressure adjuster and after 1 full turn the gauge stayed at 22psi. Spec says 28psi.

Do I keep adjusting or what do you guys think?

20231027_174548.jpg
20231027_174539.jpg
Above top screw is the only one which appears adjustable.

20231021_151310.jpg20231021_131622.jpg20231021_130911.jpg20231021_130917.jpg
 
Go in the p port
 
OFFICIAL SPONSORS

New Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock