Search the forum,

Discuss Can i work on boilers with a gas hob in the property. Owner occupier in the Gas Engineers Forum area at PlumbersForums.net

Messages
6
Hi, I am new to the industry and have recently passed my CCN1 course i have received my Gas safe id etc i am a member.

I am not qualified to work on Gas cookers/hobs

However, I have a few jobs offered, to service boilers only. in these properties, there is a gas hob. They are both owner-occupiers. I cannot get through to gas safe as they are closed I was wondering if anyone can advise me on weather or not i can work on the boiler only.??
 
Is it just servicing / checking the boiler if yes your fine
 
Yep your fine with those
 
Replacing / repairing gas hobs and cookers and doing llgsc on them
 

Reply to Can i work on boilers with a gas hob in the property. Owner occupier in the Gas Engineers Forum area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
287
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
123
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
218
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
269
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
153
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock