Discuss Can I use push fit type tap connectors on toilet fill valve in the Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Messages
49
Hello,
I have a troublesome fixed 15mm copper pipe with isolation valve going to my toilet fill valve. It's too tight for a Flexi hose. Can I use a push fit tap connector instead which will give me more flexibility in fitting?
 
Absolutely! A push-fit tap connector is suitable for providing flexibility and ensuring a secure connection without the need for soldering. Ensure compatibility with your pipe size and material for a leak-free installation. Good luck!
 
Just make sure it is not under too much strain as this can lead to a leak, or indeed the complete failure of the fitting within a few years ( the plastic fitting can shear)
 

Reply to Can I use push fit type tap connectors on toilet fill valve in the Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Creating content since 2001. Untold Media.

New Threads

Some Stats

Threads
98,776
Messages
1,073,092
Members
25,567
Latest member
FSTumi
Back
Top