Search the forum,

Discuss boxed in air admittance valve in the USA area at PlumbersForums.net

Messages
86
I'm renovating our upstairs bathroom. At the moment the soil stack is boxed in a corner within the room and exits straight through the roof. I was reading up on air admittance valves and I believe the regs say it has to be more than 200mm above the highest point of entry to the soil pipe. So I was wondering whether I can have a much shorter stack within the room, boxed in with a shelf on top?
 
I would leave it as is (going through the roof) as it might effect other properties if you change it
 
Do you have any other drain vents going through the roof ?
 
Need to keep it as is then sorry to say
 
can you explain why?

because you need atleast one stack vented

So if you have two vents you can get rid of one and install a dirgo on it
 
One thing that you could do is reduce the vent down to 2” if you really need to adjust/ the space
 

Reply to boxed in air admittance valve in the USA area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
277
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
209
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
8
Views
252
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
3
Views
330
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Replies
2
Views
212
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock