Search the forum,

Discuss Both showers have little to no cold water in the Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Messages
4
Both showers/baths have either very hot or very cold or no cold water at all. Problem fixed itself for a couple months then came back yesterday. The pressure drops for a few seconds with waves of water from shower head. Hot water heater only 9 months old. All other faucets work normally.
Hot water heater capacity is 48 US Gallon + expansion tank
Please advise
Thank you kindly
 
You could (if you have one) turn the incoming main stopcock, and run the cold taps in the bathroom, if they stop, likely to be mains fed, if they don’t, then likely tank fed.
 
What could be happening, is the cold is pushing the hot out of the way, as the supplies are unbalanced.
 

Reply to Both showers have little to no cold water in the Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock