- Messages
- 19
I have the other one off already completely already.Just swap the head then 4 Allen bolts and done
Discuss Boiler not staying on in the USA area at PlumbersForums.net
I have the other one off already completely already.Just swap the head then 4 Allen bolts and done
The electronics on this one are very slightly different. It has a self vent button on.Just swap the head then 4 Allen bolts and done
As a matter of interest, what mode/speed have you set the pump to?.Just to conclude incase it can help anyone in need in the future. It all seems to be up and running now. Boiler been on 10 minutes. Pump is clearly moving water. 3 port is working as it should be.
So it does seem to have been the pump had died.
Thanks for everybody's advice.
I have it set at 4. 3 Only tends to warm the furthest radiator in the living room. 4 is needed to actually keep it hot. Been that way for the 5 years I've been here.As a matter of interest, what mode/speed have you set the pump to?.
4th light on. 7 presses? The maximum it will go I think.If its 4 presses of the button then that appears to be constant speed 2, (3M), which LED is illuminated?.
Also good to see you are able to get a reconditioned unit as mechanically, bearings etc these should easily give a life of 10/15 years, seems a shame to throw them away after 5 years or so if the electronics can be replaced. A few Dab Evosta 4-7M pumps around here are still running away after > 8 years.
Reply to Boiler not staying on in the USA area at PlumbersForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.