Search the forum,

Discuss Boiler condemned by British Gas in the Plumbing Jobs | The Job-board area at PlumbersForums.net

I think Which? (The Consumers' Association) brought this to my attention. I can confirm I had a DeLonghi 3kW rated oil filled rad. The heating element was indeed 3kW and when switched on and running, it would draw 3kW through the electricity meter. However, once the oil was warm, the radiator was unable to transfer the heat out of the oil as fast as the heating element was heating the oil. So at this point a safety temperature heat limit thermostat stopped it heating any more until it cooled down a little (all exactly as described in the Which report). In practice, in normal usage, the 3kW rated oil-filled rad was converting electricity into heat at around 2kWh per hour if I remember correctly, not 3kWh per hour as would be expected.

Since a water-filled radiator in use in a central heating system is rated for conditions that are not anywhere near that far out from normal usage conditions, a 2kW central heating radiator will chuck out (roughly) the 2kW you would expect.

As such I would agree with you. If it's rated at 3kW it should do that! And, in practice, a fan heater, halogen, or even the very cheap type of convector heater where you can see the wires generally does do that, so I think it's very misleading.
I use several 2 kw flood lights in my workshop, 100% efficient heat & light
centralheatking
 

Reply to Boiler condemned by British Gas in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
228
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
4
Views
368
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
156
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
301
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
229
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock