Search the forum,

Discuss black pipe gas elbow or 45 in the Plumbing Forum | Plumbing Advice area at PlumbersForums.net

ted

Messages
8
don’t work. i need something in between to follow outside deck. any suggestions??
 
Don’t think they make anything in between could you have the gas pipe bent to match the angle?
 
what size pipe,you can get 45degree fittings
[automerge]1594217184[/automerge]
if you can't get right angle bend the pipe
 
what size pipe,you can get 45degree fittings
[automerge]1594217184[/automerge]
if you can't get right angle bend the pipe
it’s 1/2 inch pipe Maybe with a 45 and a 90 and a little bending I can come close? It seems to me I would need a long lengthto bend it? Yes I have 45s and 90s I can’t get the right angle.
 
If you use 2 x 90 bends, you can get any angle you want.
Don't try and mess around with 45 bends - too hard to line up and get right
 
If you use 2 x 90 bends, you can get any angle you want.
Don't try and mess around with 45 bends - too hard to line up and get right
Oh man now that you make me think about it you are absolutely right about the 90s. I made it work with 45s with struggle before I read your message. Anyway thanks so much for helping me.
 

Reply to black pipe gas elbow or 45 in the Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock