Search the forum,

Discuss Biasi M90e 24S Riva compact in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
S

Steve Costello

Hi: Biasi Riva Compact M90e 24s 2004 Model
CH pressure switch And DHW switch ok
All lights ok green and green flashing getting and switches to hot water ok. Problem is hot water goes on and off boiler screams slightly befor reaching peak scream boiler shuts down and starts 4 seconds later water coming from divertor valve and small release port on top of pump.
Indicates divertor valve. Took out divertor, valve pin pushes ok although plenty light oxide.
Any ideas ie divertor valve repair kit new divertor valve. cheers steve
 
Status
Not open for further replies.

Reply to Biasi M90e 24S Riva compact in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
1
Views
74
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock