Search the forum,

Discuss Best Van Racking Ideas? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
2
Hi all,

I'm Jim and I'm working on VanDimensions.com, a website dedicated to help professionals such as yourselves plan their van layout or help people plan a camper conversion etc.

I'm very curious to hear about the best van racking ideas for plumbers you've seen during your career.
I'm working on an article on van racking for plumbers and would like to feature real life tips and tricks from people who actually do the work and have the van.

So have you seen very smart racking solutions or hacks?
If you have any good tips please let me know!

Best,

Jim (VanDimensions)
 
My van is in the process of being racked. I say 'in the process', as I keep adding bits in between plumbing jobs and I'm still not entirely happy with it. One bit I am very pleased with, though, is my sealant storage bit. If I don't get around to posting a photo of this, please remind me.
 
My van is in the process of being racked. I say 'in the process', as I keep adding bits in between plumbing jobs and I'm still not entirely happy with it. One bit I am very pleased with, though, is my sealant storage bit. If I don't get around to posting a photo of this, please remind me.
You need to post a picture of your sealant storage
 
Mine is wooden. Purchased from eBay at an half decent price. Had to use extra brackets though as not quite strong enough.

Mine's timber as well, 2"x1" on edge with 3no. 1/2" ply shelves (have a hire van so I can transfer it fairly easily). Curver boxes or similar fit on the shelves along with cordless tool boxes; Fatmax fitting's boxes; screw tray. 11/4" waste pipe screwed to it with 2 clips to hold pipe bender. Screws to hang levels one etc.
 
Mine's timber as well, 2"x1" on edge with 3no. 1/2" ply shelves (have a hire van so I can transfer it fairly easily). Curver boxes or similar fit on the shelves along with cordless tool boxes; Fatmax fitting's boxes; screw tray. 11/4" waste pipe screwed to it with 2 clips to hold pipe bender. Screws to hang levels one etc.
Any pics ?
 
My sealant storage is a 4-gallon f&e tank, absolutely ideal :cool::D
I had a box for sealant, but I found that everything ended up in a jumble at the bottom. Whenever I tried to organise the contents so I could easily find the right type of sealant, colour, etc, that lasted until the first bend in the road... Does your tank have dividers to prevent this?
 
I had a box for sealant, but I found that everything ended up in a jumble at the bottom. Whenever I tried to organise the contents so I could easily find the right type of sealant, colour, etc, that lasted until the first bend in the road... Does your tank have dividers to prevent this?
Mine is a standard black bucket with all silicone in a vertical position. Where’s this picture of yours?
 
I had a box for sealant, but I found that everything ended up in a jumble at the bottom. Whenever I tried to organise the contents so I could easily find the right type of sealant, colour, etc, that lasted until the first bend in the road... Does your tank have dividers to prevent this?
No it doesn't have dividers I do have to rummage a bit, at least they're all in one place.
 

Reply to Best Van Racking Ideas? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
176
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock