Search the forum,

Baxi neta tec over-pressurising

Discuss Baxi neta tec over-pressurising in the Gas Engineers Forum area at PlumbersForums.net

M

MethodPH

Messages
37
Got a customer with no hot water or heating topped pressure up and was fine on hot water. Put it on heating and pressure goes from 1.2 bar to 2.8 bar in no time at all. I’ve heard about faulty expansion vessels with these. Any ideas? I’m fairly new gas safe engineer and mainly do installs. Any help here would be greatly appreciated, still learning
 
I did post there with details on the job because I thought this had been re-posted in Gas engineers only forum page.
I see it isn't and you aren't down as Gas Safe registered?
See Shaun or other mod to gain access.
 

Reply to Baxi neta tec over-pressurising in the Gas Engineers Forum area at PlumbersForums.net

Similar plumbing topics

F
Mystery Mira Elite QT Leak
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
224
Firefox
F
W
Outdoor Tap at Porch
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
218
Dave Moore
D
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
230
exedon2
exedon2
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock