Baxi eco 80 hot water fine but heating causes the boiler to cycle once rads have warmed up.firing too often in too short a period. is this something worth investing in or consider new combi.I know all parts are readily available for this boiler and don't want to plod out thousands if it can be fixed. I know we live in the disposable age but I'd rather have it repaired if it's viable.
Discuss baxi eco 80 cycling during CH only in the The Welcome Wagon :) area at PlumbersForums.net
Reply to baxi eco 80 cycling during CH only in the The Welcome Wagon :) area at PlumbersForums.net
Similar plumbing topics
Hi Folks,
I have a challenge with a Main Eco Elite 30 Combi which is short cycling on the CH. Water works fine. As soon as you have call for heat, the boiler fires up, modulates, but jumps very quickly (about 30 seconds or so from 40'ish all the way to 70, burner disengages putting it the...
Hi all
I have a Vaillant eco boiler at a new house I moved into last week.
It’s a combo boiler and the last boiler I had was old (and much easier to use!)
This one keeps turning itself off. The hot water seems to work and is always warm. The heating also works but for random amounts of time...
Good morning, wondered if anyone can advise please on a resolution?
My set up at home is that I have a 4-bed detached with 21 radiators (includes 4 towel rails), a 6m x 4m orangery/conservatory that was built last year with under-floor heating, and a Megaflo for storing hot water. The UFH...
I am generally a decent handyman, can usually make 2+2=4 and take care of most things to avoid troubling experts with just the basics, but know also not to bumble around blindly beyond that.
We moved house last week and with the glorious hot weather we weren't bothered about the heating, more...
Hi everyone, I'm looking for some advice please.
My system has 5 Drayton Wiser TRVs. There are 8 rads over 3 storeys and a 170l unvented cylinder. One of the attic rads is in the same zone as the cylinder so just has a "dumb" TRV on it. The two bathroom rads also remain without TRVs and I...
Creating content since 2001. Untold Media.
Newest Plumbing Threads
-
Trying to source a dual-flush valve
- Started by Thomas J Marshall
- Replies: 2
-
-
-
-
What constitutes a Commercial Appliance and thus a Commercial Kitchen?
- Started by FozzieBear
- Replies: 3
-
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
- Started by boiler101
- Replies: 4
-
Hole in copper pipe, solder under floor, T coupling & protection- Started by dreikher
- Replies: 0
-
-
-
-
-
-
-
-