Search the forum,

Discuss Baxi combi 80e dhw issue in the Gas Engineers Forum area at PlumbersForums.net

Hobo128

Gas Engineer
Messages
302
Called out to this boiler last night....
No hot water... Heating fine...
Run the hot tap, boiler does not fire.... Pin on diverter does not operate.... if I manually press micro switch boiler fires.... I am going to replace the diaphragm in the diverter valve tomorrow... However! I have tried this before and still no joy.... In fact I have done this twice and it's not worked... what am I missing if it decides to not work
 
There’s a pin in the back of the front diverter housing normally requires a rebuilding you can get a rebuild kit online
 

Reply to Baxi combi 80e dhw issue in the Gas Engineers Forum area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
256
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
5
Views
139
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock