Search the forum,

Discuss BAXI 105E Error 60 light in the DIY Plumbing Forum area at PlumbersForums.net

Messages
20
Hi, have changed the DHW diaphragm as wasn’t getting hot water to shower, the old one did have a tear. Now getting error 60 light every 5 or 6 times the boiler fires up. Could this have anything to do with the change I made?

many help much appreciated 😀
 
Have you checked the pressure? Did you isolate anything?
Hi, yes, I turned mains off and ran the hot tap. The pressure is at 2 bar. I also cleaned and greased the pin. When watching the pin meet the microswitch all seems good. Wondered if switch is at fault, maybe getting stuck, is it possible to clean/grease them?
 
Not entirely sure as I’ve never done one. It might be that your pump is sticking.
 

Reply to BAXI 105E Error 60 light in the DIY Plumbing Forum area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock