Search the forum,

Discuss Bathroom Disaster Please Help in the Plumbing Jobs | The Job-board area at PlumbersForums.net

You are essentially looking for ammunition. If somebody was there while works we’re carried out I plain do not believe that no one looked at the progress. If you have a scope no sensible tradesman will deviate from it as there could be serious ramifications
 
You are essentially looking for ammunition. If somebody was there while works we’re carried out I plain do not believe that no one looked at the progress. If you have a scope no sensible tradesman will deviate from it as there could be serious ramifications
True but I as well as you and probably most plumbers on here will have, at some point seen the level of stupidity that so called tradesmen are capable of. But at the same time I do agree and find it difficult to believe that her husband did not look at the install before tiling. There is no way that looking at his he thought it would be fine. Either that or he did but is playing stupid so his wife doesn't blame him.
 
True but I as well as you and probably most plumbers on here will have, at some point seen the level of stupidity that so called tradesmen are capable of. But at the same time I do agree and find it difficult to believe that her husband did not look at the install before tiling. There is no way that looking at his he thought it would be fine. Either that or he did but is playing stupid so his wife doesn't blame him.
I think that’s more likely
 
This certainly doesn’t look like a cheap job. I can never understand why trades or customers entertain starting a job without a decent schedule of works/work pack. It protects both parties and prevents situations like this.
 
Why would any Plumber think that was a good place for the shower controls!!
Absolute muppet!
What was the reason for not putting them in the shower?
 

Reply to Bathroom Disaster Please Help in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
224
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
0
Views
53
I have attached an image of the brass body within a tap. Having replaced a cartridge which has cured a leaking tap, I can see that there is a small leak from the brass body which can be unscrewed. Is there a seal behind the body? Thanks.
Replies
2
Views
291
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
175
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
230
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock