Search the forum,

Bath Taps 22m advice needed

Discuss Bath Taps 22m advice needed in the USA area at PlumbersForums.net

Y

Yorky1912

Messages
2
I am changing over my old taps to new. The supply has 15mm to cold, 22mm to hot.

I am need to fit an isolation valve to the 15 and 22mm pipe..

I want to know how i connect the 22mm isolation to the 15mm tail on the hot tap.

I dont want to use solder if it can be helped.

Advice please.

Thanks
Lee
 

Reply to Bath Taps 22m advice needed in the USA area at PlumbersForums.net

Similar plumbing topics

johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
150
exedon2
exedon2
Stigster
Does anyone know the name of this model of Roca toilet?
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
112
Stigster
Stigster
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock