Search the forum,

Discuss Bath Screen wall Profile in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Messages
2
Hi,
Can anyone suggest the best way to fit a bath screen wall profile when the silcone at the bottom is sitting proud at the bath edge and prevents the profile from sitting flush . Cutting the silcone back slightly has caused slight leaks behind the bath.
 
Remove the silicone.

Drill/plug all holes for screen, clean up with meths/isopropanol .

Silicone 2” behind where profile will go and screw profile to wall before it sets.
But of silicone inside profile where it sits on top of bath. Fit the screen.

Fill up bath with water.

Clean up wall/bath joint with meths/isopropanol, then re-silicone. Leave water in bath for 24hrs.
 
Remove the silicone.

Drill/plug all holes for screen, clean up with meths/isopropanol .

Silicone 2” behind where profile will go and screw profile to wall before it sets.
But of silicone inside profile where it sits on top of bath. Fit the screen.

Fill up bath with water.

Clean up wall/bath joint with meths/isopropanol, then re-silicone. Leave water in bath for 24hrs.
Hi,

Thanks for advice, but are you saying to run a 2" bead horizontal across the bottom before screwing back .

Thanks
Remove the silicone.

Drill/plug all holes for screen, clean up with meths/isopropanol .

Silicone 2” behind where profile will go and screw profile to wall before it sets.
But of silicone inside profile where it sits on top of bath. Fit the screen.

Fill up bath with water.

Clean up wall/bath joint with meths/isopropanol, then re-silicone. Leave water in bath for 24hrs.
 

Reply to Bath Screen wall Profile in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock