Search the forum,

Discuss Bath for a care home in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Christopher buzzard

Gas Engineer
Messages
190
I’m after a bath that can be used with a hoist. The 1s they currently use have no front panel so that the hoist can be wheeled into position. The wheels go under the bath. The bath is fixed to the wall like a standard bath.The size of the bath required is 1500mm X 800mm.
Just wondering if any1 can point me in the right direction with a link or something.

Thanks all
 
Last edited:
I’m after a bath that can be used with a hoist. The 1s they currently use have no front panel so that the hoist can be wheeled into position. The wheels go under the bath. The bath is fixed to the wall like a standard bath.The size of the bath required is 1500mm X 800mm.
Just wondering if any1 can point me in the right direction with a link or something.

Thanks all
Have a look at the Gainsborough Kent series 2.
 

Reply to Bath for a care home in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
5
Views
117
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
249
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
5
Views
111
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
198
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
194
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock