Search the forum,

Discuss Balancing radiators on Heat Pump System in the Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Messages
7
My radiators are fed by a Ground Source Heat Pump. On the balancing advice I have seen, it says to have a 12 degree difference between feed and out on a normal heating system.

My question is because the boiler runs at a lower temperature than a normal boiler, what temp difference should I be trying to set?
 
You should be aiming for a ∆T of 5-7°c on a heat pump. This should have been done by the installers though.
 

Reply to Balancing radiators on Heat Pump System in the Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock