Search the forum,

Discuss Aqualisa Rise Digital Shower - temperature issues in the USA area at PlumbersForums.net

Messages
46
Last week, the hot water ran low (we don't have a combi boiler) when I was in the shower and the temperature dipped. Since then, the temperature of the water will not go above that level. The hot water is fine everywhere else including another shower. I turned the processor off for a few hours but still the problem persists. I have tried to reset the shower from the digital unit but no success. Any ideas?
 

Reply to Aqualisa Rise Digital Shower - temperature issues in the USA area at PlumbersForums.net

Similar plumbing topics

    • Like
Hi, I thought I'd share my experience of dealing with Aqualisa about their Quartz Digital Diverter. When selecting the slider rail handset the water would also constantly drip \ stream water from the overhead rain head. When selecting the rain head the pressure was very reduced and the water...
Replies
1
Views
227
Hello all, So been having somewhat of a time with my Aqualisa Quartz 9.5 electric shower. A few.month ago I put up with a few problems it was having and in the end I replaced everything, new engine and new front cover . This was working great for a month or so, but now noticed an intermittent...
Replies
6
Views
435
Hello! Im Martyn Im new here and have joined for some advice on a couple of things. Ive got an issue with a Mira mixer shower that has increasingly become harder to operate. The shower was installed before I moved into the house. Basically what happens is that I turn the shower on so there's...
Replies
1
Views
325
    • Like
Hoping someone can please help. I have an intermittent fault with my electric hot water. I have an older style electric hot water service that heats on controlled load over night. The large tank is in roof space of 60s built villa unit. Every few mornings, no hot water will come out of...
Replies
6
Views
415
Hello all , So, very recently had an unvented cylinder put in inplace of the old gravity emersion tank we had, which fed our pumped quartz shower . We had a new digital processor installed to suit the unvented system but kept the riser rail, showerhead and control unit which we connected to the...
Replies
7
Views
4K
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock