Search the forum,

Discuss Aqualisa / megaflo drama in the USA area at PlumbersForums.net

Messages
4
I’m at my wits end!

Moved into a flat a month ago. Aqualisa Aquamixa bath tap mixer. Only ran cold from shower despite hot water everywhere else (bath taps, sink taps)

Showerdoc advised new cartridge. Bought (grey ring). Fitted. Didn’t help used original brass screws as new wouldn’t fit.

Megaflo savvy plumber called out. Later appointment made to fit a new combination valve on immersion tank as hot water pressure was too low and cold too high. He came. Fiitted. Shower started mixing but pressure was lower.
Next day it dropped to a trickle.

I text and he advised to open the stop tap more. I did this and had a wonderful hot shower with plenty of pressure. Total relief.

I touched nothing since.

Today, the next day, water pressure is high but NO HOT WATER IN SHOWER!!! Back to square one. I have turned the stop tap down again but this hasn’t helped.

He has advised I open up the stop tap again and switch back to the old, limescale ridden cartridge.
I’m not convinced this will be a fix though.

could it be anything else? I moved in last month so don’t know the history, can’t see the set up under the bath.
 

Attachments

  • C2A97E6A-636D-4979-A43B-0F5445CB262E.jpeg
    C2A97E6A-636D-4979-A43B-0F5445CB262E.jpeg
    110.9 KB · Views: 12
  • 9F58BADD-6C51-4B1B-8EC7-FE8B3630AA11.jpeg
    9F58BADD-6C51-4B1B-8EC7-FE8B3630AA11.jpeg
    116.3 KB · Views: 11
  • 5EC2A38C-0F02-4DED-958B-209CF8A91DFB.jpeg
    5EC2A38C-0F02-4DED-958B-209CF8A91DFB.jpeg
    71.3 KB · Views: 11
  • 6D3B6226-2A9F-4544-AE46-6E208EAD010E.jpeg
    6D3B6226-2A9F-4544-AE46-6E208EAD010E.jpeg
    93.6 KB · Views: 11
  • 30BC948C-CE37-425B-932E-42FE2A74762F.jpeg
    30BC948C-CE37-425B-932E-42FE2A74762F.jpeg
    94.9 KB · Views: 11
Do all the other hot taps in your house function correctly? do you have a picture of the valve your plumber changed? is it a combination valve?
 
This sounds like an unbalanced hot/cold supply issue at the shower valve. It would really help if you can upload a picture of the combination valve on the cylinder including the pipework below it that feeds into the cylinder. We need to ascertain if you have balanced supplies or not.

If your cold supply is higher pressure than the hot supply, you will get the symptoms you describe at the shower and sometimes other mixer type outlets.
 

Reply to Aqualisa / megaflo drama in the USA area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
301
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
175
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
6
Views
209
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock