Search the forum,

Discuss Any idea what this is in the airing cupboard? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
4
The attached pic is of an airing cupboard with hot water tank and associated pipework etc. Does anyone know what the device is with the white sealant around it near the tank? I assume it's to allow you to monitor water dripping from something.
Thanks.
Airing Cupboard.jpg
 
:D

Tundish

I would recommend getting a g3 (unvented) qualified person in to check over and service the system
 
Sounds a good idea. The colour of the floor looks like there has been a leak at some point. This might explain the quality repair job at the bottom of the Tundish. ;-)

Its not actually a leak , its been discharging for some reason, however it may have been fixed
 
Looks like the tundish has been splashing and some one has wrapped something around the air break..you need to unwrap it
see if it spashing if so get qualified person to check the system over
centralheatking
 
Status
Not open for further replies.

Reply to Any idea what this is in the airing cupboard? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
245
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
4
Views
164
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
0
Views
103
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
202
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
166
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock