Hi,
I am a DIY/Homeowner, who has done some simple plumbing tasks, such as adding plumbing for a washing machine. I can use compression joints but haven't ventured to solder, and I can recognise the difference between a 22mm and a 15mm pipe!
I would really appreciate it if folk could help me with my question here:
www.plumbersforums.net
I think that the Central heating forum is te correct one, but please let me know if there is one that is more likely to get replies.
(P.S. I forgot to say in my question that our main heating system is electric, using off-peak electricity -state of the art Dimplex Quantum Heaters, which work very well indeed for us - which is why a new electric only water cylinder makes sense for us).
I am a DIY/Homeowner, who has done some simple plumbing tasks, such as adding plumbing for a washing machine. I can use compression joints but haven't ventured to solder, and I can recognise the difference between a 22mm and a 15mm pipe!
I would really appreciate it if folk could help me with my question here:
Advice on replacement Towel Rad on Gravity System heated by Multifuel Stove
Hello, My current installation is an 8Kw Morso Stove, about 20 years old, connected to: An indirect coil in a vented cylinder (on the ground floor where the heater is, but raised by about 80cm), gravity fed with a bathroom towel rail upstairs also gravity fed. Once the gravity circuit is up...
www.plumbersforums.net
(P.S. I forgot to say in my question that our main heating system is electric, using off-peak electricity -state of the art Dimplex Quantum Heaters, which work very well indeed for us - which is why a new electric only water cylinder makes sense for us).
