Search the forum,

Advice please - Worcester heat slave 20/25

Discuss Advice please - Worcester heat slave 20/25 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
L

Lad257

Hi all,

New to the site, so forgive me for jumping straight in with an issue.

I cannot get my boiler To ignite? On Saturday we ran out of oil, but until then the boiler at worked perfectly?

New oil delivered today, wont start?

I have already bleed the the oil and it's now running consistently, however when I press the reset button, it just makes a werring sound?

Any advice?
 
constantly pressing the red lockout button can destroy your burner pump!
 
Status
Not open for further replies.

Reply to Advice please - Worcester heat slave 20/25 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
300
Chuck
C
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
227
exedon2
exedon2
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
165
SimonG
SimonG
F
Mystery Mira Elite QT Leak
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
222
Firefox
F
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock