Search the forum,

Discuss Acs certificates bpec in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

dsmart

Plumbers Arms member
Plumber
Gas Engineer
Messages
187
Can anyone tell me how long bpec take to send out your acs certificates once they receive your paperwork?
 
College have 10 working days to do paperwork and send them to derby office, then they have 20 working days to process and upload to Gas Safe, on the day they upload to Gas Safe they will send your cert in the post, these times are max to allow for heavy work load, so could be sooner
 
Ok cheers Kirk! done my ccn1 and appliances roughly a month apart will that make any difference ?
 
Depends if the college held them and sent them as one package, it makes it easier to cross reference it all, and only costs one certification fee, and is quite usual to do, as having CCN1 on it's own is just about useless as you can only run gas pipes, and can't connect to appliances, so you won't get a job fitting gas pipes
 
Last edited by a moderator:
Haha my ccn1 and cpa1 came through the door the day kirk!
 
That's good, now you can run a gas pipe and blank it off, in 5 yrs time it will make sense to do them all together
 
Another 30 days till the appliance ones come through! Stupid college...
 
Mine were super fast.
Less than 2 weeks from being passed to them hitting my door mat !
 
Status
Not open for further replies.

Reply to Acs certificates bpec in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Sticky
Morning to any Australians lurking around! Register its free, then message me, I'll sort your account out for you. We will need a moderator from each main country too. I'll post this in the Australian forum now.
Replies
0
Views
65
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
161
    • Like
  • Sticky
We have 2 brand new cordless, battery powered press tools in stock, and flying off the shelves. Our TekTools TZ1930 & TZ1550 are packed with advanced features - these cordless press tools are engineered for speed, precision, and ease of use across various applications. Just reply to this thread...
Replies
5
Views
822
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
123
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
296
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock