You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
remove
Remove before flight is a safety warning often seen on removable aircraft and spacecraft components, typically in the form of a red ribbon, to indicate that a device, such as a protective cover or a pin to prevent the movement of mechanical parts, is only used when the aircraft is on the ground (parked or taxiing). On small general aviation aircraft, this may include a pitot tube cover or a control lock. The warning appears in English only. Other ribbons labelled "pull to arm" or similar are found on missiles and other weapon systems that are not mounted on aircraft.
Remove-before-flight components are often referred to as "red tag items". Typically, the ground crew will have a checklist of remove-before-flight items. Some checklists will require the ribbon or tag to be attached to the checklist to verify it has been removed. Non-removal of a labelled part has caused airplane crashes, like that of Aeroperú Flight 603 and, in 1975, a Royal Nepal Airlines Pilatus PC-6 Porter carrying the wife and daughter of Sir Edmund Hillary.It is common to see key rings, T-shirts, bag tags, belts and other such products with this ribbon, especially for people who work in aviation or are aviation enthusiasts.A green tag is sometimes used to identify components that must be attached before flight in a similar way to remove before flight components.
HI,
I am new here so I hope this is the right place to post. I am an experienced DIYer having done most jobs in my own house over the past 35 years. My nephew has recently moved into a new-to-him house. In the bathroom is a flush to wall toilet and close coupled cistern Picture below.
The...
Soapsuds
Thread
can't
cistern
flush
oil
overflow
remove
supply
toilet
wall
water
Hi All,
I'm trying to take the hot tap apart to replace the washer. I've turned off the water but cannot get the tap apart.
Hopefully you can see in the photo below. Online advice says to take the cap off and unscrew the top. There is a groove in the top of the tap but i can't work out if the...
Hi, hope you can help me. We have just placed an order for a new gas fire, hearth and back panel and the fire shop has said that they can remove the isolation valve currently situated about a foot away from the existing hearth (you remove the cap and screw the internal part in to isolate). They...
Unregistered
Thread
elbow
fitter
gas
gas fire
illegal
isolation
remove
valve
is anyone experienced with hep20 plastic 22x10mm 4port manifolds.they differ from the other fittings (bends ts etc)slightly, are the10mm ports demountable.ive tried and had no joy.help!
gasso
Thread
bends
fittings
help
help needed
hep20
manifolds
needed
remove
Hello,
I'm trying to change a few taps around the house, and once I bought the basin wrench, the bath tap was a doddle, and feeling proud, I decided to move onto the sink...Here I've hit a snag - I haven't a clue how to get to the tails of the tap as when I look under the sink, there's a brass...
trying to remove the aerator on the mixer tap in my bath. No obvious means to remove it, it's a male connector and is flush with the tap. No obvious notch to insert a screwdriver in. Have tried some needle nose pliers on it but any more force will break the spokes. Some bad pictures to show you...
idiotwind
Thread
aerator
help
help needed
needed
obviously
problem
remove
removing
unscrew
Friends
Got a confidence issue (again)!! Nothing new. Stressed, headache fed up.
So, a toilet is dripping when flushed from under, tighten wing nuts, not really any difference.
Undo & remove cistern, pan cracked, plumber 6 months ago siliconed it & put in a piece of plastic food carton lid...
Hi,
After attempting to remove a tightly fitted washing machine hose I am now getting a small leak. The photo attached show where the leak is appearing. I am quite the plumbing novice and I'm wondering if it is possible for me to fix this or does this require a plumber?
Thanks,
Oli
Photo is...
0liver12
Thread
hose
leak
machine
remove
trying
washing
washing machine
while
Hi all,
Bit of an odd one, we moved in to a place which has a WB combi boiler in the kitchen (fitted around 2010), but up in the loft there's an old Thorn M floor standing boiler. Can't quite make out exactly which model from the pics.
Spoke to a gas safe plumber who said he'd never seen...
Hi,
I was looking some advice - attempting to remove a tap handle but cannot locate any screw to do so. The Hot and Cold indicators on the tap seem fixed therefore haven't a clue as to what to do to get this off.
I have attached a picture, any help would be appreciated.
Thanks.
PS -...
These bath fillers ((Part number A4021AA) come as a pair with one turning on clockwise and the other turning on anti-clockwise. I can see why you would want this with the taps mounted on the bath as the handles could be pointing sideways for off and towards the bath for on.
I have mounted mine...
Hi All,
first post here although have been a lurker for a while. I am hoping one of the pro's can advise me on the best practise and also most workable way to do this.
I have removed a large radiator from my hallway and want to cap the tails off. I am 'DIY' proficient at soldering and...
Banner_J
Thread
advise
pieces
practice
radiator
remove
removing
soldering
tails
Hi,
I'm trying to find a radiator that fits these brackets, I do not know what size the original radiator is and the wall brackets have been plastered over making them difficult to remove.
Vertical distance between radiator mount points/slots 230mm
Horizontal distance between mounts...
joeyh
Thread
brackets
choice
distance
radiator
remove
these
wall
Has anyone tried taking apart one of these yet?
I have accidental sucked water into the machine 3 times now, each time I then have to take it to a repair centre. They have it for around 10 mins, say they have cleaned out the pump and charge me £35.
it can't be that hard to do but wouldn't...
Hi, I have a mixer tap in my kitchen with a leaky hot tap - I can't work out how to dismantle the tap as there isn't a screw or removable cap, can anyone shed any light on how to do it?
Picture of the tap is here: https://www.dropbox.com/s/kj1lppe8jymi65i/Tap_pic.jpg?dl=0
Many thanks,
Jason
ShawJ
Thread
below
cover
handle
remove
screw
shaft
tap
tap cover
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.