You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
gas fires
A gas-fired power plant or gas-fired power station or natural gas power plant is a thermal power station which burns natural gas to generate electricity. Natural gas power stations generate almost a quarter of world electricity and a significant part of global greenhouse gas emissions and thus climate change. However they can provide seasonal dispatchable generation to balance variable renewable energy where hydropower or interconnectors are not available.
Just had a call from my 94 year old aunt (lives on south coast)
Today had a annual gas service. Many years ago very large room dividend in two plastered stud wall pair of doors in middle doors never opened (but could be)
Gas fire in each room, engineer has disconnected one fire saying you...
In the final stages of finishing my has portfolio and I’ve hit a brick wall.
Trying to find someone I can jump on board with in order to finish off my work on gas fires is proving difficult. More to do with the fact that not too many folk have have fires anymore.
If there’s anyone based in...
Ladies/Gents,
I'd appreciate some advice myself on this one! Went to a inset gas fire today to do a service. Took the fire out of the brick chimney and noticed the flue liner and insulation stuffed all round the sides. No closure plate around the bottom of the flue liner nor connection from...
Hey all just wanted to get your thoughts,ive always been under the impression that a fire under 7kw doesn't need ventilation,after talking to a colleague who needed some advise on a fire another colleague over heard and said that all fuel effect fires need 100cm2.
In my viper book there is a...
Anyone out there with a gas fire who thinks it doesent need servicing think again this was in a bedroom no oxysafe and no catchment area fire was full of debris
it had already been capped by BG
SMALL ROOM WITH NO VENTS HOW IT DIDNT KILL THEN ILL NEVER KNOW
hi
i'm about to get my chimney swept in preparation for a gas safe guy to come and fit a gas fire for me. i've currently got a wire balloon guard on my pot and wasn't sure if i should get the chimney sweep to push it off when he cleans the chimney or if they are ok with gas fires? it's the...
Just a quickie - can the high efficiency type of gas fire be fitted in a standard, lined chimney or do they have to attach direct to a vent through the wall ?
I will NOT be doing this myself, but want to rip out existing infill in my chimney breast and prepare for a new fire
Regards
Denis
Hi all just wondered what peoples experiences and or thoughts are on remote control fires. I've serviced a fair few of them now and find them quite temperamental. I did one two months back and it took me nearly two hours to do cos I couldn't get it to fire up again after, the appliance had...
All right guys, I have been kicking my heals in the sand and not fitting them but i have had a few come in for the next few weeks. Long Long time i have not installed them i have my gas fires on my gas card which is not hassle at all.
So one fire is a baxi BBU replaced with a fire, customer...
Fella has phoned me up, wanting a gas fire fitting, its out his sons house nextdoor "its only a few years old" and has the Manual. Its a Valour Legend. Not sure wether to entertain it or not. Not really keen on gas fires at the best of times, but Ive had far too many quiet days the past...
Hi Guys,
Have any of you fitted gas fires after removing a back boiler. Im not quite sure about this? The customer has an inset fire to be installed.
He has cemented the holes where the old flow and return pipes used to come through.
The fire surround had a horse shoe shapped opening but the...
Danv44444
Thread
after
back boiler
boiler
fires
fitted
gasgasfires
oil
removal
So I when to service a Baxi Baroque today & also changed the jets on it as the originals were blocked & fire was not lighting. What an arsehole job it turned into! servicing the fire and changing the jets was fine. Whipped of the closure plate to have a quick inspection and clean, I say whipped...
i went to service a gas fire ,when i put a smoke pellet i got a lot of back draft ,so i got the chimney/flue swept and a anti-draft cowl put on,now ods is tripping fire out, no air ports on fire ,at a loss.
I already know the answer to this one, but thought I would give it a try anyway!
I need manual for Portway Gas Fire, Model Number: EAC16NG. Purely for the coal placement.
Cheers
Hi all,
Haven't posted many times but I need to check myself on this!
I'm studying towards my gas quals, so any pearls of wisdom greatly excepted!
my question is regarding gas fires,
I understand I can carry out my wp @ meter check for a gas fire, no probs there! then i should check the wp @ the...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.