Search the forum,

filler

Fillér (Hungarian: [ˈfilleːr]) was the name of various small-denomination coins throughout Hungarian history. It was the 1⁄100 subdivision of the Austro-Hungarian and the Hungarian korona, the pengő and the forint. The name derives from the German word vier (four). Originally it was the name of the four-kreuzer coin. Due to significant inflation that took place after the fall of communism, fillér coins are no longer in circulation. The last fillér coin, worth 50 fillér (0.5 forint) was removed from circulation in 1999. However, it continues to be used in calculations, for example in the price of petrol (e.g. 310.9 forint), or in the prices of telephone calls.

View More On Wikipedia.org
Recent contents Top users
  1. C

    Best place to source low pressure bath filler taps

    I'm having a nightmare trying to find matt black wall or deck mounted bath mixer taps with 3/4 fitting that work on 0.2 bar. From tank to tap, I have around 2.4 metres, so a pressure of a little over 0.2 bar. The flow measured from the tap currently fitted is 11 litres per minute. Pretty much...
  2. A

    Does anyone recognise this bath filler?

    This bath filler/overflow is supposed to turn to divert water flow to a shower above. It’s not clicking across anymore. Does anyone recognise it? Fitted in 2014. It was installed together with this Bristan inbuilt thermostatic controller.
  3. G

    Overflow Bath filler and valves

    Hi, I'm really struggling to find out what part I need to use deck valves like this with a overflow bath filler. Most bath fillers seem to only have one connection. This one has 2, one for hot one for cold which looks like it could work. Anything I'm missing? thanks
  4. J

    Vado celcius 2 way divert bath filler pulsing output

    Vado celcius 2 way divert bath filler or shower, fed by salamander pump, water pressure and temperature to shower outlet works perfectly well, when diverted to the bath filler water output pulses. all input valves , cartridge and diverter valve replaced but issue still remains. Shower in ensuite...
  5. K

    No water sound when turning filler tap by expansion vessel.

    Have an Ariston unvented hot water tank in airing cupboard with the red and white expansion vessels and a filler tap. As advised years ago on these forums when I hear that sound that the central heating water needs topping up I usually wait until cold so the gauge goes to zero and top up to 1...
    • KenTucky
    • Thread
    • america expansion expansion vessel filler no water sound tap turning usa vessel water
    • Replies: 1
    • Forum: USA
  6. H

    New filler valve rather loud. Any ideas?

    Morning all hope all is well. I recently needed to fix our leaky main bathroom toilet. I thought as I am taking the cistern off the wall I'd replace all the parts so I wouldn't have to worry about it for a few years at least. I installed a new flush valve and a new filler valve. Both work fine...
  7. M

    Solvent weld gap filler?

    Hi all. Has anyone used this stuff before when having a weep on a solvent joint? I got a joint on the soil pipe connecting to the underground drainage pipe which would be a nightmare to rip out?
  8. gmartine

    CT1 filler adhesive

    I'm looking for a quality robust sealant between rubber bathroom flooring and sanitary ware as well as gap filling between floor and skirting, it's not a wet room but needs to go off hardish and be easy to clean. Does CT1 fit the bill?
  9. R

    How To Adjust Alien Filler Valve

    Hello all Came across a kind of filler valve I haven't see before. Wondering how you adjust it. Anybody familiar with this one? I don't want to experiment with it because it looks super fragile. (Wouldn't it be great if manufacturers gave you a clue on their products as to who they are?) Cheers
    • RayPooley
    • Thread
    • adjust america filler usa valve
    • Replies: 4
    • Forum: USA
  10. J

    appropriate fitting for bath filler tap

    Hi, i have two bath filler tap valves to pipe to the combined bath filler/drain. The valve body is external 3/4 inch thread with an internal 1/2 inch thread (see picture). Straight tap connector doesn't seem the correct fitting due to internal thread and a male adaptor doesn't sit flush as it's...
    • Jeepy
    • Thread
    • america bath filler fitting tap usa
    • Replies: 3
    • Forum: USA
  11. dandouglas

    How do I connect the taps to an overflow bath filler

    I purchased an overflow bath filler and taps but struggling to see how to connect that taps to the actual overflow filler. I've included a picture of what has been sent to me and any help would be much appreciated. I have looked everywhere online for some instructions but to no avail. I am...
  12. J

    Low pressure (0.2 Bar) dual control mixer tap and bath filler

    Hi. We have been looking for a low pressure (0.2 Bar) dual control mixer tap and matching bath filler for our bathroom. The ones we like the look of are from Tavistock, Vado or Tre Mercati. Please would anyone on the forum with experience (good or bad) of these manufacturers taps give me some...
  13. J

    Help identifying a toilet cistern filler valve?

    Hi I'm a home owner as was going someone here could help me identify my toilet filler valve and where I can source it? Thanks Neil
  14. Eyespy999

    Looking for a good clean white waterproof tile filler

    Evening, I am planning a bath replacement, some of the tiles around the bath are damaged so looking to make good before i put the new bath in. A few old screw holes need filling too. Any reccomedations on a good waterproof hardy tile filler, white preffered. Screwfix have some filler but if...
  15. U

    How long before a PRV goes if the filler loop taps are left open?

    On a combi boiler, if the taps on the filler loop are left open will the PRV fail very soon? Does it depend on how often the hot water or heating is used? The PRV on my tenant's boiler has failed. It happened shortly after the heating was turned on for the first time since the summer...
  16. P

    freestanding basin taps

    Can anyone help me source some free standing basin taps i know there are free standing taps for a bath but i require them for a basin ie basin height any good suppliers any one can recommend thanks :smile:
  17. L

    3 hole basin mixer

    Hello I have had to replace a 3 hole basin mixer tap valve and can't source a single ceramic valve so have had to order a new complete tap set... Only thing is I've been given a 3/4 size set. When I phoned the supplier they told me it is for bath and basin. I have never fitted a 3/4 basin tap...
  18. R

    1/2 inch to 3/4 inch flexi

    Hi, Im installing a bath waste filler with side valves. However to connect the valves to the filler i need a flexi hose. Problem is the valve is 3/4 and the filler is 1/2. cant find one anywhere. on there instructions it says sorry 3/4 hose not included but as i say its 1/2 at the filler...
  19. R

    Combi boiler filler loop

    Friends I've got to change one. The one in situ at present is a few years old & has tap heads so it's not up to part L spec & it leaks which is the reason for the change. It's a small system of about 7 rads. I know its compression etc. As always my confidence is the issue. I'm just going to...
  20. W

    Stocking filler for the nipper.

    After reading all the reviews I finally decided on, and went and bought the nipper, a Superfire 2 as stocking filler. It's down as from the dog, so he can't blame us. One or two bad reviews as to the Super fire’s brazing ability, as they say the nozzles too wide for brazing, and there’s no...
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock