You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
bsp
The BSP for Bulgaria (Bulgarian: БСП за България, romanized: BSP za Bŭlgariya), or the Coalition for Bulgaria (Bulgarian: Коалиция за България, romanized: Koalitsiya za Bŭlgariya) until 2017, is a left-wing electoral alliance in Bulgaria led by the centre-left Bulgarian Socialist Party. A big tent of the democratic socialist left, it is a coalition of communist, left-wing nationalist, green, and social-democratic parties. On European Union politics, some of its members hold pro-European views, while others hold more Eurosceptic stances.
In short: Do suppliers sometimes list BSPT as BSP?
I need a tee, 22mm each end with a BSPT in the middle for an expansion vessel to dangle from.
Why I think its I've used calipers on the threads and counted them, and the male end sticking out of the vessel is BSPT 3/4 with 14 threads per inch...
I'm new to this. Could you explain please: this fitting is described as - 'Brass Threaded Elbow - 1" BSP TM x BSP PF Elbow BSP Taper Male x BSP Parallel Female' - but I can't see any kind of mating face on the female side so I'm wondering if it's actually an Rp taper female rather than a G as...
Hi All
Looking to replace this so i have a standard threaded end outdoor tap, looks like they have managed to fit an indoor tap outside as is?
Will a standard 1/2" outside tap like this screw on where the union is?
https://www.NoLinkingToThis/p/outside-tap-with-double-check-valve-15mm-x/37241...
Afternoon, all.
Currently have proprietary diverter valve on shower riser with handheld outlet standard 1/2" BSP male and inlet also 1/2" BSP male. The outlet to overhead shower is custom female fitting and feeds a larger diameter chrome covered plastic pipe feeding large and inefficient...
Hi all
I have a leak from the 1/2” BSP Sensor Pocket Assembly Long of a Megaflo Eco SystemFit Unvented Cylinder.
Any ideas on how to fix it?
regards
Jim
I'm trying to connect my Garden Tap which has a 1" BSP outlet to my HydroSure Swivel Manifold.
The connector on the HydroSure becomes water tight when tightened with the thread all the way to the joint. The Tap outlet is not deep enough to cause this seal. The connector requires a depth of...
Hi, I have recently purchased a bsp adapter for a npt pipe, the pipe has a 3/4" male end (thread size). The 3/4" adapter has a female opening of 1" and is obviously to large. I have received this response from the seller of the adapter...
The bore actually measures 5/8".
Am i being duped to...
I need such a spanner to remove a failed IH, and to install a replacement; in a domestic hot water cylinder made by Opus (Cyprus).
I am aware that in general the distance across the flats may vary somewhat from brand to brand, despite all having 1.5" BSP threads.
In my case, both old and new IH...
As a novice I apologise in advance for any misunderstanding in the description of my issue.
I have to make some amendments to a bath tap with a brass fine threaded pipe. This involves cutting the pipe in two and finding a way to connect the two halves again after circumventing a bath overflow...
hi
I bought an American hose kit with a 3/4 inch Male GHT thread. I have a 3/4 inch BSP female hose fitting. Is there any couplers that could be got and if so where can I find them. I have checked EBay, amazon and Screwfix. Maybe I am looking up the wrong names??
Any advice would be...
Hi,
I'm trying to work out the best set up for connecting my water tank to a pressure washer.
The outlet on the tank is a 1" BSP brass female.
The inlet on the washer pump is a standard brass hoselock type fitting.
I'd like to have a 1/4 turn ball valve on the tank so I can disconnect...
Hi....I'm not a plumber but have fitted a few taps and waste water pipes. Even though I've done that, I get confused when I look at the Screwfix catalogue that say for example "Flexible Tap Connectors".
They give the following...
"Dia - 15mm, BSP 3/8 " and
"Dia - 15mm, BSP 1/2 "
I think the...
Hi,
Just wondering how I can go from a 3/4 bsp ball valve female to a 22mm compression fitting male.
I’ll be visiting some plumbers merchant today would be handy to know what to look out for.
Thanks in advance.
Hi there,
I am making connection to the backboiler on a Rayburn. It has 1"BSP female threads. I understand I need to use male BSP iron connectors with fibre washers.
I need the flow pipe to exit and immediately turn a sharp right angle downwards, in order to avoid part of the fitted kitchen...
Hi,
Just joined the forum.
I have a large log burner which has one and a quarter inch BSP fittings.
I wish to change the layout of the pipes after removing an old oil boiler. The pipework is rock solid in the fittings and even using a Stilson with a length of scaffold pole attached won't...
Hi. I'm a new member so please be gentle with me!
I have a narrowboat and have been experiencing some problems with the exhaust leaking fumes.
I have fitted a new flexible coupling because the old bellows had split but now find that the silencer has rusted through and needs replacing.
I need to...
I've got a Swedish buffer cylinder as part of my ground source heating system. I'm trying to find an immersion heater with a 2" bsp thread for a sensible price. Everything in thus country seems to be 2.25" bsp.
Any advice gratefully received!
Thanks
I have a fair degree of experience with 15/22/28 mm fittings in both compression & solder but I am now fitting an UFH manifold which has flow and return presented in 1" BSP fittings. All fine, I have various of these fittings that convert to 22mm compression. All would be lovely if it wasn't...
Hi there - bought a pegler CH pump valve - 1 1/2" to 22mm compression fitting (are there any other with difference connections). Thought that I could remove the compression nut and olive and connect to a 3/4" BSP female coupler - but the screw thread won't engage in the coupler. I've done this...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.