Search the forum,

baxi

Baxi is part of BDR Thermea, one of Europe's largest manufacturers and distributors of domestic and commercial water and space heating systems.
Baxi employs 6,400 people throughout Europe, with a turnover exceeding €1.2 billion. The group has significant market shares across all major continental territories and in the United Kingdom. It is also expanding into new markets such as Romania and Argentina and already has a direct presence in Russia, China and Czechia. It has a presence of joint venture partnerships in developing locations, like Turkey.
Today, BDR Thermea owns and sells some of the leading brands in the European market for heating products.It is known under various pseudonyms worldwide, including Chappée and Ideal Standard in France, Roca in Spain, and Broetje in Germany.
Baxi operates four sites in the UK: Warwick, Preston, Norwich and Wokingham. There are also numerous training centers nationwide, including Dartford and Godmanchester.
Its investment is based on boiler products and renewable technologies, including solar thermal hot water systems, ground source heat pumps, air source heat pumps, biomass boilers and micro combined heat and power with baxi-innotech.

View More On Wikipedia.org
  1. A

    Baxi Duo Tec Keeps Dropping Pressure

    Hi, I have a baxi duo tec 28 HE which keeps dropping pressure and return E119 error code. In the last month it's had to be topped up 3 times and I topped up again early this week to 2 bar and today the pressure has dropped to below 1 bar. I've checked all the radiator valves for leaks but...
  2. Jimmy18

    Baxi 105 he breakdown

    hey guys, Had a call out today to a baxi combi that’s one of my dads friends. Got there and no heating or hot water. So took off the case and checked a few bits. Pump not running so checked power from pcb. 230v checked power at pump, nothing. Also when my ears pricked up a bit is when I looked...
  3. Scott_D

    Baxi Duo tec 28 service

    Got one one these to service next week but I dont see many Its 5 years old and still under warranty Is it recommended to replace the burner door seal? Anything else that should be replaced eg electrodes?
  4. R

    BAXI DUOTEC COMBI 24 HE A. Diverter issue. Motor, Sensor or Valve

    Hello all I have a BAXI DUOTEC COMBI 24 HE A. I suspect a diverter issue. Symptoms are hot water but cold rads. No fault codes to report. At least nothing that begins with the letter "E". No fuse issues. There is a CENTER wifi stat involved but I am satisfied that's functioing ok. Been...
  5. M

    Help with a Baxi Solo 30 HE Regular

    Hi All, This is my first ever post as a newly registered gas safe engineer. I’m looking for help on an issue I tried to help with for an old couple that live locally to me. They have the above boiler and very recently have had constant issues with it kettling and almost immediately locking...
  6. Steve weightman

    Baxi solo explosive ignition

    Visited a baxi solo 24he with explosive ignition so looking for spark electrode issue or gas valve issue or even inlet pressure but all looking ok. One thing I noticed was the programmer is faulty flicking on and off . Just a thought but would you think this could be the issue partially...
  7. C

    Baxi Megaflo Vs Baxi Ecoblue?

    Hi Guys, Making a choice between buying Baxi Megaflow 32KW System or Baxi EcoBlue 32KW System. Will be supplying Megaflo 210L cylinder. Baxi themselves don't seem to be able to give any answer on the differences other than one has an LCD screen, the other is just LED screen with turn knobs...
  8. S

    Baxi Combi 105 HE drips water

    Hey, I've got a Baxi Combi 105 HE, and there's a component at the bottom that drips water. Not a lot, I'd say 1 drop every 10 sec, but annoying though. Here's a screenshot from the manual with the part I mean: Is this something I can fix myself? I can do basic plumbing and central heating DIY...
  9. H

    Baxi combi zoned is additional bypass needed?

    Hi, Just installed U/F heating in my extension so put S plan in with 2 valves on the return. When the valves close the boiler carries on for a little while (orange connected to boiler heat demand). The manual says 'The boiler utilises the primary side of the DHW plate heat exchanger as an...
  10. G

    Baxi BBU with Bermuda fire front.

    Hi, I have a Baxi BBU AND Bermuda fire front. Both are in perfect working order and we’re not looking to have a combi installed anytime soon. Are there any fire fronts that are compatible, if we wanted to change it? Fire works perfectly. But it’s ugly! I have seen an SP3 on Ebay, but not...
  11. G

    Baxi Duo Tec 2 GA problems

    Hi guys, do any of you know when Baxi discontinued theDuo Tec 2 GA? I have had a long litany of faults since it was installed in 2012.
  12. F

    Daily lockout on Baxi boiler.. aargh!

    I had a engineer round my place last week to service my Baxi 100 HE Plus boiler as every single day I'm having to press the lockout button to get the heating to come on. He gave it a clean, increased the pressure and told me it should all be ok. But it isn't! The problem is still ocurring and...
  13. quality

    Baxi Part Numbers .

    Does anyone know the difference between the 2 part numbers below for Baxi multifit flues 5118489 7222019 TIA
  14. C

    Baxi diverter valve actuator issue

    Hi. Have an issue with a Neta Tec 28GA boiler that’s not been the most reliable. Latest problem (if anyone can help), is heating works fine, but hot water is intermittent but rarely works now. Diverter valve cartridge replaced but still no good. Weird thing happening to the actuator though...
  15. F

    Baxi Solo 3 PFL 60 plume smells of unburnt gas

    Hi there Plumbers Forum, I have a problem with a Baxi Solo 3 PFL 60 and am looking for any helpful advice… The boiler is 15 years old and, according to most, will happily go on another 15. The flue exits in to the side-return area between 2 terraced houses. BUT it now puts out a puff of...
  16. A

    Baxi Duo Tec 28 HE A Intermittent Noisy

    This boiler has had this fault for over two years. Many engineers have been but never when at fault. Many parts have been changed. When at fault it is generally when the outside temperature is very cold. The boiler is noisy and and never manages to raise the temperature high enough for hot water...
  17. M

    Baxi 105he keeps cutting out

    My boiler keeps stalling. If I wiggle the wires on a micro switch. It restarts. Have ordered a new switch but concerned it may be the (igniter?) Valve below.any advice please?
  18. S

    Baxi DuoTec driving us NUTS.

    Our Baxi DuoTec is driving me and our GS Engineer nuts. The pressure has been dropping right off ( down to the stop) several times per day over the past 6-8 weeks and I've had to top it up each time. The ECV is ok, the PRV is ok, we suspect it's a underfloor leak on the ground floor, the floor...
  19. A

    Baxi 105e. Best/easiest to replace with???

    Repaired a 105e today, diaphragm and split pressure gauge tube. Its had a few parts changed over the last few years. Expansion vessel has now gone. There is no where to fit one externally and the customer has asked for a price to replace. Happy to stick with a similar boiler, what would be the...
  20. H

    New Baxi high pitch hissing sound

    Hi all, I had a new Baxi Duo-tec installed a couple of months ago. Over the last few weeks I've noticed and intermittent high pitched hissing noise when the pumps running. If I turn off the CH and then watch the boiler, the CH light and burner light switches off but the the noise stays...
Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock