I need a new seat for a Bathstore Euro mono back to wall white pan e14. The seat was a euro mono sandwich seat white chr hinge
Bought in 2007. I know that bathstore went bust and homebase bought the old stock. I’ve searched online and found some replacement seats for the euro, but they don’t...
The syphon activation cable on my old Bathstore A2432 dual flush valve has broken and I don't want to have to remove the whole cistern to replace the the complete unit. Does anyone know of a replacement valve the syphon part of which I can use to slot into the existing cradle, please? I hope...
Hello,
I've got a thermostatic shower valve feeding a shower head in the ceiling of my bathroom. The bathroom is in my loft, so 3rd floor. I have a system boiler setup on the ground floor.
The shower was running stone-cold whatever the settings so I fitted a new cartridge but even now at it's...
I've just fitted a new slotted basin waste and aligned the slot towards the overflow hole in the sink. The overflowing water doesn't go out fast enough and could spill over if the tap is left on too long.
The basin is a Bathstore one and when looking at it before fitting the waste I noticed...
Hi, we have really good water pressure where we live. But that in turn has left us with very noisy taps in the bathrooms.
At the moment we have Blade taps from the Bathstore - Blade Basin Mono Mini Mixer | bathstore. They have aerators but our water certainly isn't aerated. The taps are...
cmitch
Thread
basin
bath
bathroom
bathstore
blade
high
high pressure
kitchen
kitchen sink
pressure
sink
sinks
tap
water
[I posted this morning but I was unregistered - here it is again]
My shower bath has an old model of the 3 valve Bathstore thermo valve (Can't post more than one link as a new user).
The thermostatic valve is seizing up, so I thought I'd take a look inside. I removed the handle and the...
alexuk
Thread
bathstore
cold
collar
crosswater
first
heating
hot
plate
shower
thermostat
thermostatic
valve
First-time poster and plumbing ignoramus, so please be kind....
I have a leaking toilet pan connector. The leak started when there was an old Multikwik connected.
I called a plumber and he tried a few different connectors and they all leaked. He said the spigot coming out of the toilet pan...
pulck
Thread
bathstore
connector
leak
oil
pan
pan connector
right
size
spigot
standard
toilet
I bought a bathroom suite from BathStore 8 years ago with no problems till now.
Investigating a bad leak from the cistern of the WC, I found it was from the doughnut area. What puzzled me was that there was no bracket holding the doughnut, it was just squeezed in between the cistern and the...
busy bee
Thread
bathroom
bathstore
cistern
close
coupling
oil
toilet
washer
Hello,
I am new to this site and the Plumbing world but I hoping to fit a new bathroom to my house. I have looked in Bathstore and chosen the below products for it, but not yet bought them. I have decided on a little bit of research first:
Products:
- Trend Back to the wall bath / Trend...
Hi Guys,
I need some help the wife has been into the bathstore and likes a sink and toilet. I want to know if you can tell me who manufactures them, the bathstore informs me they manufacture their own products, I find this hard to believe I would think the are just unbranded goods.
The wife...
tris101
Thread
attach
bathstore
color
manufactures
oil
parts
sinks
toilets
Hi Guys,
I am installing a new bathroom and on-suite. I need to fit a basin with a pedestal on a Karndeane floor with a tiled wall. The wall is a stud wall with an 18mm plywood patress behind the plasterboard. My questions are as follows: -
I purchased a 'Fischer' WD8 X 100 wall mounted basin...
Sullivan
Thread
advice
basin
bathstore
fitting
pedestal
please
should
silicone
Hi
About to install my first wall hung WCs, the customer has bought them from Bathstore.
I have had a look at the frames and they look fairly straight forward.
They are to be installed inside box work which will be tiled.
Does anyone have any experience with the Bathstore wall hung WCs and...
Hi Guys,
I am just about to purchase suites and fittings for two bathrooms. My installer recommended I visit the 'Bath Store' which I did. The service and advice received was first class to be fair to the assistant and I was confident and intended to purchase from there.
Later whilst...
Sullivan
Thread
bathroom
bathstore
fittings
help
looking
merchants
please
plumbers
quality
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.