Search the forum,

Can anyone identify this flush valve?

Discuss Can anyone identify this flush valve? in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Scott_D

Scott_D

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
6,131
8E68F0F5-1DA4-40EE-B71E-88490C8F5ED6.jpeg
 
If it’s handle down for full flush, handle up for half ?
It looks like Burlington (cistern looks like that too).
Don’t know actual manufacturers but that will find it in a search.
 
Ben-gee said:
If it’s handle down for full flush, handle up for half ?
It looks like Burlington (cistern looks like that too).
Don’t know actual manufacturers but that will find it in a search.
Click to expand...
Yes
I was looking for the same flush valve to see if the guys could be changed without removing the cistern
 

Reply to Can anyone identify this flush valve? in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Similar plumbing topics

J
Leak detection company
Does anyone know a good, not super expensive, leak detection company in the London area?
Replies
0
Views
288
John-sjw
J
P
Viessmann combi starts when cold, mixer, tap is opened
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few seconds! Can anyone tell me what is causing this? And how to cure?
Replies
3
Views
191
ShaunCorbs
ShaunCorbs
M
heatrae sadia 25l 9004010.
Has anyone one fit or serviced one of these before; Heatrae Sadia 25l 9004010. It a 25 litre hot water storage cylinder.
2
Replies
39
Views
622
John.g
J
Stigster
Does anyone know the name of this model of Roca toilet?
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
124
Stigster
Stigster
B
What is correct toilet supply line
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
177
ShaunCorbs
ShaunCorbs
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock