Here is a pic of the motorised valve, a Honeywell unit, and for some reason there is no label or serial/model number on the unit! We bought this place about 10 years ago, and I think the boiler is approx 12 years old.
I am reasonably happy to replace the head unit myself as the wiring seems...
OK thank everyone so far, I do believe the culprit is the motorised valve under the boiler. I listened to this very carefully this evening, and when calling for CH, I can hear the motor running, but it is very slow. Much slower than when the call for the CH stops.
Additionally, after giving the...
Hmmm, the other end of the cable is squirelled behind the partition wall and may be my next mission tomorrow!
I am going to, as suggested, listen to the HW motor valve as I know that is working, and I will do the same for the CH one.
Thanks for the help, and will report back after tomorrow...
I will check again in the morning as had a few beers and not the best time to do DIY (or is it the best time)?
Yes I do have a multi-meter and am Ok using it, checking for voltage or continuity, so I am guessing I would need to remove the cover of the valve and check the voltages?
The timer...
Guys the plot thickens!!
After a good root around the airing cupboard, I did indeed find the motorised diverter valve, but it’s not on a three way valve system, it is just one in one out, and I am 100% certain that this is for the HW only. The motor seems to be working fine, since when calling...
I will re-check the zone thermostat tomorrow in the day light, but when I check it via the app, it seems to be reporting the right temp (17deg), but will check it. I will also check the airing cupboard for the diverter valve too, and from memory it is the usual electro-magnetic type, with a...
yes, I do indeed have an airing cupboard, where the pump is installed, and the storage heating tank. I will have a good root around in there and look for anything obvious. Thanks.
Hi everyone,
I have a Climote (but re-badged by Scottish Electric) timer, which I think has developed a fault, and need some advice as I have a problem.
First off, I have a Valiant traditional boiler, pressure good, power good and regular servicing. I note that when I ask the Climote for HW...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.