Recent content by intamixx

  1. I

    Low cold water pressure after vented boiler replacement

    Hello, Finally sorted it thanks to your help. Managed to connect a 15mm right angle tap connector into cold water pipe under bathroom sink and blast it with hose (coming in through bath window) pressure from garden tap. It removed the airlock straight away and cold flow was back to normal after...
  2. I

    Low cold water pressure after vented boiler replacement

    There are 2 circular valves in the airing cupboard (about 30cm distance between them) I attached pictures of them. Are these the gate valves you are referring to? The upper one was very hard to turn. I haven't tried the lower one.
  3. I

    Low cold water pressure after vented boiler replacement

    Thanks for the response. The cold water tank is filling up as normal with good flow if I manually empty it out a little. I seem to remember a circular wheel valve in the airing cupboard at head height next to the copper cylinder. It was very hard to rotate. The plumber mentioned this was not...
  4. I

    Low cold water pressure after vented boiler replacement

    Hello, I have a had a gravity boiler replaced from a Potterton 80e to a more recent Valliant ecoplus boiler. The cold water tank is in the loft space directly above the 1st floor bathroom and the hot water copper immersion tank is in the 1st floor bathroom cupboard space. A fairly normal...
    • intamixx
    • Thread
    • after america boiler cold cold water pressure replacement usa vented water water pressure
    • Replies: 6
    • Forum: USA
  5. I

    Potterton Suprima 80e running continuously

    The gas engineer and I am assisting.
  6. I

    Potterton Suprima 80e running continuously

    Hello, I have a potterton suprima 80e boiler. The pump stopped working last week blew the fuse on the main pcb board. I replaced the fuse on the pcb board and it kept on blowing the fuse. We replaced the pump for another one and the pcb started working ok, but did the boiler flame did not...
  7. I

    Is the install of my Gas Hob safe?

    I purchased the property 2 weeks ago, the vendor left me the certificate on completion so I'm not sure how much he paid for it. The check was made in March 2016. The gas engineer who carried out the checks in this instance holds a valid gas safety licence. I usually pay £45 for a 2 appliance...
  8. I

    Is the install of my Gas Hob safe?

    Thanks for the replies. Makes sense that it is deemed unsafe. I'll get the hob taken out and put in an electric hob away from the window. I'll also have a quick word with the person who has gave me a gas safety certificate 2 weeks ago.
  9. I

    Is the install of my Gas Hob safe?

    Hello, I am looking to rent out my house and it has recently obtained a gas safety certificate last month for the combi boiler and gas cooker hob appliances. The estate agents have said 2 other gas engineers since then have deemed my gas hob installation unsafe for the following reasons...
  10. I

    Cold Water Control Valve Pack leaking

    Hello, My Cold Water Control Valve Pack is leaking. See attached picture for info. It has some limescale build up at the bottom and leaks for around 2 hours every 24 hours. Its leaking slowly at the moment. Does this mean I need a new part or is there something I can do to stop it from...

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock