Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

gmartine's latest activity

  • gmartine
    gmartine replied to the thread I need help finding toilet seat (URGENT).
    The seat is a non standard shape, by the time you Sod around trying to find a good or ill fitting match or bodge some fittings you...
  • gmartine
    gmartine replied to the thread I need help finding toilet seat (URGENT).
    Not really fb, look closer. The manufacturers name is embosed on the underside of the seat lid, otherwise no chance I would've bothered.
  • gmartine
    gmartine reacted to fowlerboi's post in the thread I need help finding toilet seat (URGENT) with Love Love.
    Ah very good. Somehow missed your posts before I submitted mine. Going to blame the formatting of the ads on this forum. Good job...
  • gmartine
    gmartine replied to the thread I need help finding toilet seat (URGENT).
    We need more credit than that fowlerboi ;), pretty sure that is a match with the tapered front end which is not something you're going...
  • gmartine
    gmartine replied to the thread I need help finding toilet seat (URGENT).
    I haven't checked too hard, I suggest you do or give them a call...
  • gmartine
    gmartine replied to the thread Does this make sense.
    He didn't power flush your system he just tried to get away with chemically flushing it instead because it takes less time. Important...
  • gmartine
    gmartine replied to the thread Ducting for kitchen extractor fan.
    42cm circumference = 13.37cm diameter or 133.70mm so a 125.00 mm diameter replacment will be in spec. However as above, what's the...
  • gmartine
    gmartine replied to the thread Ducting for kitchen extractor fan.
    No matter the size of kitchen, the extractor hood manufactuer will dictate the size of ducting.
  • gmartine
    gmartine replied to the thread Toilet keeps blocking.
    The lower part of the pan gasket is compromised, you might get away with giving it a good clean (gloves on) and rotating or refitting it...
  • gmartine
    gmartine replied to the thread Any ideas?.
    If your plumber thinks that get another plumber. Problem with drawing HW from the top outlet is depleting the cylinder and then...
  • gmartine
    gmartine replied to the thread Ideal boilers.
    https://www.gov.uk/product-safety-alerts-reports-recalls/product-recall-ideal-heating-logic-2-combi-and-system-boiler-range-2401-0138#:~...
  • gmartine
    gmartine reacted to i3_happy's post in the thread Old gas pipe - what material is this? with Like Like.
    Thanks all for your input, much appreciated. In the end...angle grinder did 95% of the job, finished off with a small hacksaw.
  • gmartine
    gmartine replied to the thread Mess left by Ideal Heating Gas Engineer.
    I'm sure the plumber is just as annoyed at having to replace the pot of sealant when he thinks he has some, it was clearly an accident...
  • gmartine
    gmartine replied to the thread Recent boiler room upgrade.
    Now you're just showing off. ;) Tf for press fit eh? If you get a chance can you list a quick spec, building type etc.
  • gmartine
    gmartine replied to the thread Thoughts.
    If the window smashed there'd be plenty of ventilation. :) I take your point, glass isn't ideal but it isn't hazardous either and lets...
Show older items

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock