Search the forum,

Recent content by eagleeye

  1. eagleeye

    Powerflush one pipe system

    It's only really the pipe I wanna do first to see if I can clear the blockage. Rads I can deal with after. If I shut off all rads and just do the pipe it should work shouldn't it ? I was so thinking about using a magnet on the pipework I can get to to see if I can locate a blockage. Although a...
  2. eagleeye

    Powerflush one pipe system

    Hi all, I have a client who has a one pipe system and 2 pipe combined. Long story short is that the boiler stopped work and was diagnosed by another engineer as the heat exchanger was blocked. We were asked to attend and check their findings. Worcester 24ri just under 5 years old. No filter...
  3. eagleeye

    Andrews cylinder

    Yes I thought replacement but below is the reply from technical when I asked the question "The anodes are non-sacrificial and therefore do not require any maintenance or replacement. For this reason, the service clearance required above the water heater can be reduced quite significantly. Correx...
  4. eagleeye

    Andrews cylinder

    We have a job to replace 3 Andrew's gas fired cylinders in a commercial premises because the existing ones are after only 7 years. Andrew's technical have said its probably due to limescale but have advised against fitting a water softener. Can anyone advise what is best to a system like this...
  5. eagleeye

    Which valve

    Any idea what this valve is called please
  6. Screenshot_20210726-204002_Gallery.jpg

    Screenshot_20210726-204002_Gallery.jpg

  7. eagleeye

    Additional electrical socket for boiler in loft

    Can anyone tell me if its actually a reg or just good practice that a switched socket outlet (as well as a switched spur) MUST be fitted next to boilers in lofts so when service engineer visits there is somewhere to plug in equipment should he need it ? I have always done it but wasnt sure if...
  8. eagleeye

    Consense lagging

    Would someone be able to confirm for me whether external condense runs now must be lagged including through the wall ?
  9. eagleeye

    Connecting Rayburn to boiler circuit

    See attached what model it is. It does have any heat leak rad no.
  10. Resized_20201017_211101.jpeg

    Resized_20201017_211101.jpeg

  11. eagleeye

    Connecting Rayburn to boiler circuit

    I can get the model but no not gas. Its solid fuel. The old boiler was oil and they didn't want that anymore so went to LPG bottles with the new boiler. And yes it was and still is plumbed up to do heating and hot water
  12. eagleeye

    Connecting Rayburn to boiler circuit

    Just been to a customer where on of our installers fitted a new viessmann heat only. They have an issue with the boiler not switching on. Talking to the customer over the phone the problem sounded like a blockage so I suggested a powerflush. Anyway after today's visit I found that he has a...
  13. IMG-20201017-WA0008.jpeg

    IMG-20201017-WA0008.jpeg

  14. IMG-20201017-WA0006.jpeg

    IMG-20201017-WA0006.jpeg

  15. Screenshot_20201014-222836_Google.jpg

    Screenshot_20201014-222836_Google.jpg

Creating content since 2001. Untold Media.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock