Search the forum,

Discuss Best UFH kit to install in the Plumbing Jobs | The Job-board area at PlumbersForums.net

jaydebruyne

Plumbers Arms member
Plumber
Gas Engineer
Messages
2,718
hi all,

Wondering if anyone can recommend a kit for c/h UFH?

Cheers
 
TBH there all about the same

You want mlcp pipe
Don't go cheap on your manifold
Heatmiser controls etc
 
Wundafloor.
Send them a plan, a photo of a plan, or even a quick sketch with dimensions and type of floor.
They will give you a free quote and a plan, if you buy.
We’ve done literally hundreds with only a couple of very small probs.
You will need an underfloor clip stapler and a uncoiler.
Both can be bought from them. Or get a Uponor one from eBay.
To tip! Always order 60mm staples. ( standard is 40mm)

As it’s mclp pipe, it’s easier to form into the shapes needed for the layouts.
 
Simply it’s a composite plastic multi layered pipe
With an aluminium Layer. This keeps its shape , when bent.
 

Reply to Best UFH kit to install in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock