D
dunkerz
Hi there. My first post and I'm a far from expert when it comes to plumbing so please be patient!
I'm trying to sort out this dripping tap:
[image attached]
I've loosened undone the cap for the nozzle (see below) but it won't come out, regardless of what direction the tap is positioned in.
[image attached]
I've managed to strip it back to here:
[image attached]
I assume I should be able to loosen these bits off but they don't seem to budge.
I'd appreciate any guidance.
I'm trying to sort out this dripping tap:
[image attached]
I've loosened undone the cap for the nozzle (see below) but it won't come out, regardless of what direction the tap is positioned in.
[image attached]
I've managed to strip it back to here:
[image attached]
I assume I should be able to loosen these bits off but they don't seem to budge.
I'd appreciate any guidance.