Search the forum,

Discuss not sure this is the correct forum but... in the Industrial Plumbing Advice Forum area at PlumbersForums.net

Messages
3
we have an ambirad heating system in our place of work.
one works perfectly.
if you set it to above room temperature it comes on and works fine.
the other is as if it's in reverse.
you have to set it to below room temperature for it to come on.
which as you can guess is pointless.

can anyone help??
thanks in advance!!
 
Could be a wiring issue, which would need an electrician, but my guess is that the thermostat / controller for the misbehaving unit has been set up in 'air conditioner' rather than 'heater' mode. This is usually a software setting and I'd expect the building manager to get it sorted pretty easily.
 
Could be a wiring issue, which would need an electrician, but my guess is that the thermostat / controller for the misbehaving unit has been set up in 'air conditioner' rather than 'heater' mode. This is usually a software setting and I'd expect the building manager to get it sorted pretty easily.
thanks.
 

Reply to not sure this is the correct forum but... in the Industrial Plumbing Advice Forum area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock