Search the forum,

Discuss Toilet fill valve - trying to identify part in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
15
Hi

I have an old style toilet and the valve has failed but it's so old I can't find a replacement and don't know what to ask for.

Can any professional plumbers help me identify what I need to source?

Photos attached.

Thanks
Neil

20190525_081342.jpg


20190525_081351.jpg
 
Fluid master bottom entry fill valve https://www.NoLinkingToThis/p/fluid...VMjQVQj0BPGeaHSNL2-sDV_YH_uYeZ9waAtxBEALw_wcB
 
Just replace the diaphragm rather than the whole thing! It will be MUCH cheaper & MUCH more environmentally friendly as the rubber of the diaphragm will be recyclable. #NoBrainer
 
Just replace the diaphragm rather than the whole thing! It will be MUCH cheaper & MUCH more environmentally friendly as the rubber of the diaphragm will be recyclable. #NoBrainer

Like one of these, also available elsewhere if no local screwfix https://www.NoLinkingToThis/p/fluid...Vc_D_BwE#product_additional_details_container
 

Reply to Toilet fill valve - trying to identify part in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
129
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
12
Views
314
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
180
Does anyone know where I can get one of these? Toilet is leaking into the bowl. This one pushes in with a half turn but I can't find one anywhere.
Replies
2
Views
190
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
1
Views
99
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock