Questions and plumbing advice in the Water Underfloor Heating Advice - .
Some popular plumbing forums: Plumbing Advice - Plumbing Tools - Plumbing Courses & NVQ's
Forum Prefix Filter
Water UFH Installers Directory
Water Underfloor Heating Installers Directory. Here we help you find professional expert water underfloor heating installers in our free to use directory. Always use this forum as part of your own research. We can surely find you a water UFH installer with lots of references to check etc. :)
- Threads
- 2
- Messages
- 13
- Views
- 6.7K
Hi folks.
Sorry this is a long one. I'll try and keep it organised.
Son has just moved into a purpose built (2013 ish) 4th floor apartment as a tenant. No gas in the building. Triple glazing.
1. The letting agent led him to believe that the electricity supply was on an Eco 7 meter. He didn't...
Good day all,
I would like to get some advise and perhaps the solution to the issues with my UFH system.
We did install UFH in an entire house and got rid of all radiators.
The system is 14 port manifold (only 12 are in use) feeding 7 zones.
Total room area is 97 m2, with the biggest zone...
Hi, we have a leak from the underfloor heating manifold. It appears to be leaking from one of the thermal actuators (please see photos). It’s leaking about a cupful every day. So far, I’ve talked to about 10 local plumbers:–
Contacted original installer. The admin person kept telling me that...
Good morning, wondered if anyone can advise please on a resolution?
My set up at home is that I have a 4-bed detached with 21 radiators (includes 4 towel rails), a 6m x 4m orangery/conservatory that was built last year with under-floor heating, and a Megaflo for storing hot water. The UFH...
Heating System
Have 2 houses where identical Heating systems installed (self & neighbour)
In Dec both Baxi boilers were replaced with Viessmann Vittodens 30W due to ageing reliability issue.
System is as per drawing
Hot Water Draw off
Thermal Store operates by the process that as DHW is drawn...
Hi
I installed ufh on two floors. My question is can I run two manifolds on two floors with one pump and mixing shunt?
How do I go about connecting the manifolds together, do I run a T straight after the pump before it enters the first manifold or do I connect the second manifold after it...
Looking to install a kitchen island with integral sink, this will mean installing drainage and plumbing. But will need to dig a hole through UFH, has anybody done this before?
Background story: About 18 years ago we refurbished 75% of our house and self-installed UHF in that part of the property with the help and advice of a good friend of mine (who is also a Gas Safe registered engineer). At the time we purchased a design and complete kit of parts from a young...
Need some advice and help! (I am not a plumber so will try and give as much info as i can)
I have a room in my house with 2 loops of ufh in it. They are controlled by the same thermostat.
They have separate actuators at the manifold as well.
When the heating comes on one actuator opens fully...
Hello. I am here for some advice please.
We have a water underfloor heating system in our house and have recently had some issues with one of the zones seeming to overheat with the heat still being sent despite the thermostat not sending demand or even being on an all. These are all new...
- Question
Hi everyone, we have a 1920s house with solid brick walls. The small front carpeted lounge (1.9 combined tog of underlay/carpet) with its own UFH circuit is struggling to get to 20 degrees. The UFH pipes run under about 5m of LVT to get to the front lounge.
My question is, can I boost the...
- Question
Hi folks, I’m in need of some sound advice.
We have recently had a ground floor extension and have had underfloor heating (company: JK UFH) installed throughout most of the downstairs. We have a few rads still left downstairs and the entire upstairs is still heated through rads.
We have a...
- Question
Hi folks, I’m in need of some sound advice.
We have recently had a ground floor extension and have had underfloor heating (company: JK UFH) installed throughout most of the downstairs. We have a few rads still left downstairs and the entire upstairs is still heated through rads.
We have a...
Boiler: Valiant Ecotec 832
UHF (new): 2 zone mixing manifold, Heatmiser Neo Air thermostats x2, Heatmiser UH8 RF (wireless) wiring centre
Central Heating (existing): Netatmo radiator valves connected to Netatmo thermostat and boiler relay
Other (new): Two Honeywell motorised valves - 1 for CH...
Hi All,
hoping for some advice and pointing in the right direction.
I have a Worcester Bosch 40he condensing boiler, supplying hot water as priority, central heating radiators using TR2 thermostat in one room.
no auto valves on radiators or storage tank.
I have built a small extension and...
- Question
Hi All,
We're been living in a new build property for the past 2 years without any obvious heating issues. We've an underfloor heating system that's split across 4 rooms, and is driven by a Daikin ASHP.
I've occasionally had to take the actuators off in order to release stuck pins after...
I have a UFH manifold from Wundatrade with a Grundfos pump. The pump feed has a mixing valve which has a hot inlet from the thermal store, and a cold inlet from the return manifold. In-between the mixing valve cold inlet and the return manifold, is a tee which returns the cold water to the...
Hi all, I've just had my wet UFH connected up and turned on for the first time in my new extension and I've got a couple of questions:
The screed was laid 6 weeks ago and my floor finish tiles haven't been laid but I'm looking to get them laid in about a week, so would like to spend the next...
Hi, as part of an extension/refurb project I will be fitting UFH over a new concrete floor as well as existing joisted timber floor. Both floors being within the same room.
My question is whether anyone has done this mix of subfloors before and noticed a performance/temperature difference...
My daughter has just had a new boiler, her system is radiators to upper floors and underfloor to all of ground floor. Despite the valve serving the underfloor being turned up to a high temperature and the pipe leading to the pump being very hot the flow and return pipes on the manifold are only...
Creating content since 2001. Untold Media.
Newest Plumbing Threads
-
No Hot water, Fixed and Broken Again Ideal Logic 24
- Started by Filthbags
- Replies: 0
-
-
What's happening to this radiator, paint flaking off?
- Started by mikmikmikmik2024
- Replies: 1
-
Is it necessary to earth bond a Kitchen Sink?
- Started by Cello
- Replies: 2
-
Show us your fanciest radiators you have installed!!- Started by Lou
- Replies: 0
-
Y Plan, no hot water but heating is working when called
- Started by Chopper9495
- Replies: 8
-
-
Towel Rail Valve Advice please (35 Characters needed.)
- Started by NorthernLad
- Replies: 6
-
Unvented discharge at high level current regs
- Started by Matt0029
- Replies: 11
-
Trying to source a dual-flush valve
- Started by Thomas J Marshall
- Replies: 2
-
-
-
-
What constitutes a Commercial Appliance and thus a Commercial Kitchen?
- Started by FozzieBear
- Replies: 3
-
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
- Started by boiler101
- Replies: 4
