Never fitted a corner sink and am unsure how the brackets should be used?
I'm putting in wood fixing behind plasterboard today so thought I would dry run fitting the sink.
Fitting the brackets as in the top pic leaves a gap all round the sink making it unstable.
The bottom method makes the sink...
hi everyone , I usually use calypso for bathrooms as I've never had a problem with there products but i have a customer thats on a tight budget , was just wondering what manufactures are you using that you have tried and tested ?
who would you use for budget /mid range/high end ?
Hello
I have a closomat toilet with a douche spray
The spray meant to come out and go back in automatically
However it does not come out by itself. I can manually pull it out but even when j hold it out no water comes out
Any idea what's going on ?
Am I the only one who sometimes puzzles over dual flush buttons? There are so many variations and each one seems to assume you know which bit to press for long flush and which one for short.
Just a few examples...
... and then there are the large wall-mounted ones too. Is there an unwritten...
Hi All
Every now and then I have to unscrew the chrome waste which is attached under my freestanding bath and pull all the hair out from the plug hole. Unfortunately the greenish gasket/washer that goes inside the u type chrome bend which then screws onto the threaded plug hole sticking through...
Hi - Im trying to remove this seat - i have tried pushing in the white buttons and prising them off but no joy - keen to see if anyone can offer some advice !!
Having replaced the soft close seat on this suite twice,(which are not cheap), plus the soft close hinges, does anyone know of a viable alternative soft close seat that looks good on it.
Many thanks.
Dave
Ive a Geberit Sigma 40 dual flush plate with odour extractor. I replaced the carbon filter with new one after LED button flashed (instructed this is why it flashes) but it still flashes are new one installed. How can I stop it flashing and get it to work properly?
Hi
I’m trying to make use of an existing 6” waste pipe for a repositioning of a toilet in a ground floor bathroom.
The waste pipe centre from wall is 275mm.
I don’t really have the room to pull the toilet forward to connect normally.
Can I get a bottom outlet toilet, if so where? Or is there...
Hi - can anyone help? I’m trying to find a replacement plug for my bath (plug hole in pic) but have no idea of the type needed. Other pop up plugs don’t appear to fit. Thanks
Hi there. So i need to change the Hatria toilet seat cover, but i cannot take it off the toilet so easy. I found few hidden screws in the hinges and unscrewed them, but the hinges only got loosen and that is where i am stuck. I add some photos. Anyone could help?
I’ve moved into a flat with L&Q and the cheap plastic toilet seat has already come loose. I cannot figure out how to fix it for the life of me, I’ve never seen anything like this before. I have no access to the underside so I can’t just tighten it like I usually would. I’ve attached some photos...
Hi guys. I’m looking to purchase an 1100x760 tray for my own house and just wondered what you guys recommend? Cheers. I’m currently fitting JT Fusion trays at work which don’t seem to bad.
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.