Hi guys, new to this forum. Im a heating engineer with my own business, we are a new company called KRE Heating Services. We carry out a good amount of boiler installations and looking for a competent engineer who can help out with these. Looking for someone who's reliable and experienced. I pay...
Looking for a qualified plumber for a new build site in White City, London.
The work being carried out is 9 floors of trench heaters (60 units per floor), domestic risers, toilet cores and the material used is stainless steel, crimped.
Working hours are 08:00 - 17:00, and you’ll receive a...
I have a System boiler with a programmable room stat and a still very common Honeywell ST699 basic programmer - ten years old. I know that this crosses over into an ‘electrical’ issue but would appreciate if anyone could tell me if anyone has seen this fault and if it shows shows it is faulty...
Hi,
Just joined - and would really appreciate some help with the following.
I've been living in my house for about 15 years - no major plumbing issues. Earlier on this year, I noted avery small amount of water coming up through my wood flooring in my sitting room, in between the 'joins'.
Now...
so i've just moved into a new flat.
Vokera Compact 25HE boiler.
hot water works fine, boiler kicks in as normal when tap is run.
however, i can't for the life of me work out how to get the heating working.
there is no roomstat in the property.
the rads all have their TRVs set to 3 (out of 5)...
I am bench testing a Nest and Heat link. Wired it up as per instructions. Neutral and live, plus the live being linked to terminals 2 and 5. On a multimeter there is 240V between neutral and live, neutral and terminal 2 and neutral and terminal 5. When there is no demand for heat from the NEST...
hi guys. When the riello burner is firing when I pull out the photocell and cover it up the flame goes out then comes back on? Can you tell me how I can test the photocell so I know it working?
The boiler firebird it's starting to lockout at the burner every so often I have noticed the oil pump...
Need a heating engineer in Central London
I currently have an old worcester boiler. Since its original installation I've had many upgrades to my flat which now has 3 bathrooms and 7 zone underfloor heating plus 3 towel rail radiators. The greenstar I currently have is no longer sufficient...
Been a big fan of the Trappex Centramag 2 for some time and finally have my hands on the new Genesis filter.
All brass construction and with a 25 year warranty it certainly looks the part, solid but compact.
Initial impression out the box is positive. 2 part construction with a triple seal...
Evening All
I used this forum over the last month to research my problem with the Logic 35 boiler losing pressure.
Background - My 4 year old boiler began losing pressure at around 0.3-0.5 bar every day about 4 weeks ago. Like any worried home owner i checked the following things:
1. PRV - tied...
Hi, my thermostat is about a year old and the screen has gone blank, changed the batteries. Then opened up the back and the on buttons were at the off position so clicked them back on. However its still not working, is there anything else I can try? The receiver now has a flashing red light so...
Good Afternoon,
My name is Jordan and I am a fully qualified emergency gas engineer (working on external aspects i.e. services and mains) for a Gas distribution transporter. I currently hold a few domestic qualifications (I have renewed these from my time working as a First Call Op for the same...
The work required is two-fold:
1) Firstly, to perform a power flush on the 11 radiators contained in a four bedroom detached house.
2) Secondly, to install a new upgraded radiator in the main bedroom for improved heating.
Note: the bedroom floor has already been modified to allow easy access...
Hi,
writing up my last report for my gas portfolio and have come up against something i can't work out whilst doing the gas rate figures!!
Data plate shows Hot water pnw 34kw and qnw 34.7kw (hi)
manual shows gas rate norm level 3.78m3/h minimum 3.4m3/h maximum 3.97m3/h
If i fudge a gas rate...
Need somebody competent with pipework in awkward places to fit a destratification pump and appropriate nrv's to a dhw cylinder. Only the plumbing not the electrics
We are looking for an experienced plumber or heating engineer to join Pinnacle Heating & Plumbing Ltd.
We offer very competitive salary (up to £42,000) based on your qualifications and experience, a van, pension and 28 days holiday.
Normal working hours are Monday to Friday 08.00 - 16.30...
Do you have some experience with Air Source Heat Pumps and are looking for your next role? Evergreen Energy are hiring for a Commissioning Engineer in North Yorkshire now! Please pm Cecile
Hi there, does anyone know if there is any plumbers who can help me out would be really grateful as I am a plumber myself but I need some training and to shadow someone so if any plumbers are taking on please let contact me, thank you. Any help would be appreciated.
Hi there
I have a monobloc tap in my bathroom which is exactly like the one in this video:
For some reason I absolutely cannot get the decorative shroud (so easily unscrewed 37 seconds into the video) undone at all. It's recently started dripping, so need to get it off in order to fix.
Any...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.