Hi back in February I had a bit of bother with my 11 year old Alpha combi boiler.A new diverter valve and motor,new PRV and condensate pipe were fitted and all was well.This week for the first time since, I,ve had to top up system via the loop,it probably took about a thimble full to get it...
I have a Flamco Flexvent in the CH system, and it has been there for over 20 years. Now it is starting dripping from the cap location, and the cap could not be closed off. I would like to have it replaced, but not sure whether I have to drain the CH system. Advice will be highly appreciated...
I'm installing a bathroom in a very old property and the boiler is a Worcester 35cdi ii 2005 model and there is no filling key available on site for it.
Would it be ok to bypass it and fit a standard braided hose filling loop from the cold mains to the central heating return on a Worcester...
Hello,
I am looking for advice and ideas. I moved into my house 2 years ago with a Valiant Eco Pro 28 combiner's boiler. The Radiators look pretty old and have recently just found out that the previous owner had installed the system himself.
I had the boiler looked over and a NEST installed...
Hi am looking for some help with a water heater that has been driving me crazy. I fitted the Worcester Bosch W11 in a caravan around about a year ago, after fitting this boiler I was having problems with the boiler shutting down occasionally when hot water was flowing so i changed the flow...
Hi I have a rangemaster kitchen tap, with a curved spout and quarter turn valves.
It's about 3 years old.
With both valves off there is no leak.
When one valve only is full on, water leaks from the top of the opposite valve stem. It's like the water has traveled to the opposite side, above...
Sorry - I should have posted this in the Central Heating section.
Hello All,
I don`t know how many Members would be affected by this and at present it is only a Boiler Manufacturers interpretation of possible amendments to the Building Regulations Fire protection relating to Boilers in Flats...
Does anyone know where I can obtain the above heat exchanger for an ideal systemiser se boiler , Manufacturers part number 075096 or, if not available, is there a generic?
Hi,
I am a newbie in this forum, so my apology if I posted my question in the wrong forum.
The water pressure in my flat has dropped to very low pressure, which allows for only one tab at a time to be operational.
It happened end of July and is continuous low 24h.
There seems to be no obvious...
Hi,
Finding this site really usefull but would like to hear peoples experience with the installation and merits of retrofit underfloor heating.
I live in a 2 bed semi detached built in approx 1996. I want to fit a low profile wet UFH system to the whole of the downstairs (approx 20 sq/m). I am...
I have a leaking valve on the mixer tap on my boat. So I know that I have to empty the water tank on the boat, which is just a case or running the tap for an hour until it runs out and makiing sure we are not on shore power so the calorifier is not heating water while I do it.
Hi All. I am refurbishing a house i recently bought. It would have 4 shower rooms and 6 vanity units in the bed rooms plus kitchen tap and a tap in utility room plus if i conver the loft into living space it need to be future proof to add one more shower room. Total radiators would be 16-17 in...
Greenstar Intelligent Filling System – the new self filling valve. I was so excited about it but now I’m not sure about it… Had to call the technical and they sad to me that the valve will do no more than two consecutive top-ups within the set blocking time - 4 short bursts at the time. The...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.